Press Releases
Canada Carbon Receives Complete Results on its Asbury Property with Interpretations that Include 5.00%Cg over 33.35m (English) |
March 27th, 2023, Toronto, Ontario, Canada - Canada Carbon Inc. (the "Company" or "Canada Carbon" or "CCB") (TSX-V:CCB),(FF:U7N1) is pleased to announce it has received all of its assay results from the December 2022 drilling & Trenching program completed on the eastern part of its Asbury Property, located in Notre-Dame-du-Laus, Quebec (“NDL”). Drilling and trenching were conducted from November 21st, 2022 (see news release dated January 9th) to November 30th, 2022. Drilling Highlights
Channel Sampling Highlights
The planned objevctive of the survey was to test the northeastern part of a regional trend. The trend is composed of multiple conductors and VTEM anomalies, that connect the Asbury historical mine to the recently worked area (see figure 1). According to Dubé (2013), this trend extends more than 4km from the Asbury deposit to the northeast. Historical mining operations at the Asbury (Graphex) Mine extracted 875,000 metric tons of graphite at a 6%(Cg) cut-off grade (Charbonneau 2012). The 2022 program consisted of 6 diamond drillholes “DDH” (previously reported) totaling 830 meters, and 6 trenches which returned over 60.5m of channel samples. The drill program aimed to test some targeted VTEM anomalies and conductors at depth. The Company next steps will be to send additional samples from unassayed sections, to potentially increase the length of the intersects and to prepare the next drilling phases. The Company is also planning to further test the area with ground geophysics, between the mine and the recently drilled area, where numerous conductors remain untested. This geophysical survey is aimed to better define the conductors where high grade mineralization might be located. Eventually, the Company expects to be able to demonstrate that the whole 4km conductor trend is graphitic in nature, and then start a resource estimate on the discovered mineralization. Figure 1: Overview of Asbury Project & Preliminary Results of Fall 2022 Campaign
Table 1: Drill Holes Assay results
Table 2: Channel Samples Assay results
QAQC A QAQC program was conducted during the drilling campaign. It consisted in the introduction of Certified Reference Materials (CRM) standard, either blank material (without graphite) or standardized value. Along the 480 drill core samples and 63 trenches samples, a total of 14 blank and 11 graphite standards were inserted. The total QAQC program represents 4.4% of total analyzed samples Next Steps Initial interpretation of the results indicates significant graphitic mineralization, which in turn explains the conductor anomalies. The Company is still reviewing results at this time and will publish a future news release upon the completion of its review when upcoming exploration plans are completed. 538 m of cores were analyzed out of a total of 830m. Some drilling sections have not been yet assayed and additional sections will be assayed to better define the mineralized horizons. Ground geophysics is also planned between the mine and the recently drilled area, to better define the conductors where high-grade mineralization might be located. Finally, a second phase of drilling will be aimed at supporting a resource estimate for the Asbury Property. Chief Executive Officer, Ellerton Castor, said: "This first drill program on this section of the Asbury deposit allowed us to better define graphite mineralization responsible for the conductor anomalies that are located across the Asbury Property. We still have multiple conductors to inspect that reach from the historical Asbury mine, which produced very high quality graphite, up to the northeaast corner of the Property, which represent a distance of approximately 4.5km. All of the evidence to date suggests that graphitic mineralization will explain the anomalies between the northeast corner of the Property and the Asbury historical mine site. We are truly excited about the tremendous possibilities suggested by this Phase 1 trenching and drilling program at Asbury and will expedite completion of a resource statement." Qualified Person This press release was prepared by Steven Lauzier, P.Geo, OGQ; by David Fafard, P.Geo OGQ and by Pierre-Alexandre Pelletier, P.Geo OGQ, who are qualified persons as defined under National Instrument 43-101, and who reviewed and approved the geological information provided in this news release. References Charbonneau, R., 2012 Technical Report on The Asbury Graphite Property, In accordance with National Instrument 43-101 McGill Township, Quebec, Canada, Submitted to Canada Carbon Inc, 61 pages Dube, J., 2013. Heliborne Magnetic and TDEM Survey, Island and Asbury Properties. Prospectaire Geosurveys Inc for Focus Graphite Inc.47 pages GM 67561.
CANADA CARBON INC. “Ellerton Castor” Chief Executive Officer and Director Contact Information E-mail inquiries: info@canadacarbon.com P: (905) 407-1212
FORWARD LOOKING INFORMATION This press release contains statements that constitute “forward-looking information” (“forward-looking information”) within the meaning of the applicable Canadian securities legislation. All statements, other than statements of historical fact, are forward-looking information and are based on expectations, estimates and projections as at the date of this press release. Any statement that discusses predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as “expects”, or “does not expect”, “is expected”, “anticipates” or “does not anticipate”, “plans”, “budget”, “scheduled”, “forecasts”, “estimates”, “believes” or “intends” or variations of such words and phrases or stating that certain actions, events or results “may” or “could”, “would”, “might” or “will” be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information. Forward-looking information in this press release includes statements regarding the development of the Company’s Miller deposit and financing thereof, the entering of the joint venture with Irondequoit Offering, future production from the Company’s Miller deposit, sales agreements and other matters related thereto. In disclosing the forward-looking information contained in this press release, the Company has made certain assumptions. Although the Company believes that the expectations reflected in such forward-looking information are reasonable, it can give no assurance that the expectations of any forward-looking information will prove to be correct. Known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information. Such factors include but are not limited to: compliance with extensive government regulations; financial abilities; the ability to develop the Miller deposit; domestic and foreign laws and regulations adversely affecting the Company’s business and results of operations; the impact of COVID-19; and general business, economic, competitive, political, and social uncertainties. Accordingly, readers should not place undue reliance on the forward-looking information contained in this press release. Except as required by law, the Company disclaims any intention and assumes no obligation to update or revise any forward-looking information to reflect actual results, whether as a result of new information, future events, changes in assumptions, changes in factors affecting such forward-looking information or otherwise. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. |
